1. 294200-0690 Fuel Pump SCV Valve Basic Information

2. 294200-0690 SCV Valve Application to Fuel Pump Information

• 294200-0690 Fuel Pump SCV Valve Application to Car Model Information

• 294200-0690 Fuel Pump SCV Valve Application to Fuel Pump Part Number Information

3. 294200-0690 Fuel Pump SCV Valve Quality Control

• Fuel Pump SCV ValveTest

All fuel pump SCV valve spare parts are tested for electrical characteristics, accuracy, high temperature, low temperature, withstand voltage, leakage, durability, and various working conditions.

• Fuel Pump SCV ValveInspection

The factory inspection of the fuel pump SCV valve is undergone full inspection, random inspection, and batch inspection three inspections. Different brands of test benches are used to test the same fuel pump SCV valve for a total of no less than three times for factory inspection, and fuel pump SCV valve installation and test environment are progressed in dust-free workshop.

4. 294200-0690 Fuel Pump SCV Valve Logistics Time for Destination Out of China’s Areas

DHL Logistics Time ：

UPS Logistics Time：Country or Region of Departure：China’s Mainland

The logistics time is for reference only, subjects are according to the actual arrival.

5. 294200-0690 Fuel Pump SCV Valve Shipping Ways

Destination in China areas: SF Express, Debon Express, the corresponding logistics company can be provided according to customer requirements in special cases.

Destinations out of China’s areas： DHL, UPS, FedEx, TNT air, ocean or other shipping methods required by customers.

6. 294200-0690 Fuel Pump SCV Valve Lead time

Lead time：Send out within 3 – 7 working days after receiving payment (Except for special products and special cases).

7. 294200-0690 Fuel Pump SCV Valve Storage Standard

（1）Choose a suitable storage place

The warehouse and cargo yard where fuel pump SCV valve is stored should be kept clean and dry, and away from the factory buildings that generate harmful gases and dust; do not mix with acid, alkali, salt and other substances; the storage place should have a good drainage system; the cargo yard should be flattened with gravel or furnace ash etc. to enhance the water permeability of the surface layer to keep the reservoir area dry.

（2）Strict requirements of warehousing

Strict inspections should be carried out when fuel pump SCV valves are put into storage, the surface cleaning work should be done well to remove water traces, oil stains, ash and other dirt, remove the rust and do anti-rust treatment in time. The packed fuel pump SCV valves must be protected from being damaged.

（3）Keep the warehouse dry and preventing moisture

The relative humidity is usually below 70% for fuel pump SCV valves placed in the room, and the corrosion of fuel pump SCV valves is significantly reduced.

fuel pump SCV valves must be stored in the warehouse, and they are forbidden to store in the same warehouse with commodities with high water content.

（4）Stack Properly

• After the fuel pump SCV valveis exposed inrain, the corrosion rate will increase significantly. The purpose of sealing is to isolate the fuel pump SCV valve from rainwater and humid air, so the warehouse window should be checked in time to avoid rainwater entering the warehouse

If fuel pump SCV valve package is damaged, it should be repaired or replaced; when the package is damp, the packaging material should be dried; if the original anti-corrosion and oil applied at the factory is found to be damaged or dried up, it should be cleaned and re-applied oil in time.

• It is forbidden to leave the fuel pump SCV valveexposed in the air for a long time.
• It is forbidden to store acid, alkali, salt and other substances together with the fuel pump SCV valve.
• The unpacked fuel pump SCV valvemust be rust-proof during secondary storage.

8. 294200-0690 Fuel Pump SCV Valve Packing

Domestic express packaging: Usually wrapped with waterproof scotch tape, such as picture No.1.

International express packaging: Wrapped with waterproof yellow tape After wrapping the black protective film, such as picture No. 2.

Pallet Shipping: Use fumigation free and recycling trays that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties for the outside, such as picture No. 3.

Also, the products can be packaged according to customers’ requirements.

• The packing tray is made of plastic and can be recycled.
• Transparent tape, yellow tape, black wrapping protective film, white wrapping protective film are non-degradable materials,please dispose of them properly.
• Minors are prohibited from using transparent tape, yellow tape, black wrapping protective film, andwhite wrapping protective film to avoid personal injury.

Pic No. 1	Pic No. 2	Pic No. 3
Domestic express packaging：Wrapped with Transparent tape	International express packaging：Wrapped with yellow tape after wrapping with black protective film	Pallet Shipping：Use pallet that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties